Reality Raceway Rules

Reality Modified Rules- 2020-2021

# 1. Body: Approved  asphalt type modified body. . All bodies must be detailed with roll bars & window net. Reality Raceway , NY Modifieds , & Jer's bodies .

No modifcations.  No Econo Bodies. Others upon approval..

All cars must have a Drivers Head and Air Cleaner/  Hood bubble.  It is intended that these cars look as realilistic as possible.  Also the 

intent is that the cars remain as  spec. cars  . All  bodies  must have  windshields and rear panels and must remain. No air holes front or rear.  Rear panels on  all mods required.   Max. spoiler ht. is 5/16 " from interior deck panel. No Vanes. All Bodies will conform to the 

Reality body design Specs..(supplied)  Conventional

NEW  words to help discribe Rules ..Conventional = Meaning Conforms to the intent of the Rules. & Non-Conventional = does not 

comply with intent to conform .

    Straight wired controllers only. >>>Subject to Approval.<<<< Conventional Parma or Koford ONLY ..with Brake Adj. NO 

Electronic devices between track and controller handle.  ONLY External brake reostat  allowed.

# 2. Chassis:  The New Reality Modified Chassis ..PN:RMC- 2019 , PN: RMC-2016-18  ,

Parma FCR # 577 and K & G cut to pattern. K & G Straight cut add 10grms. Others upon approval       

NO PAINT or Tape on CHASSIS BOTTOM  that interfers with chassis gauge

   Front wheels may spin independently. Must have soild steel axles front and rear.   Minimum axle dia. 1/8 ".

 Oilites: May be modified ..Oilites may be soldered/ glued in. Oilite hole on chassis can be opened.

Parma  # 626 offset or # 628 centered  oilites. # 623-# 623A round...   Ball Bearings ALLOWED. .Replacing oilite...  Any  Guide flag                                                                                                                                        

                        All cars must have rear bumpers made from 1/8 - 3/16 " channel, square, or rectangular. .

 Rear bumper Minimum ht. 5/16 " any part there of.  All cars must have full side bars, full  double rear side-bars as spec car sold,

  1/16 " dia. max.  Front bumper must attach to the chassis at 4 points.  May be reinforced with piano wire.                            

   All bars must be approved. Brass or Steel

   No chassis modifications.  May be reinforced w/piano wire . Motor bracing allowed.   No drilling or lighten of chassis. 

                          Weight may be added. All weigh must be stationary   ... Minimum weight - 145 grms 

   Chassis Clearence is .047min.   

# 3. Spacers: Parma Chassis Only > Left Frt.- one- .060 .Left Rear one-.160 minimum wide. Chassis ALL 3-1/4 wide w/gauge

# 4. Tires: ALL Tires.. Pro-Trac Daytona Stockers ONLY.    Nail Polished allowed.  MUST have PRO-TRACK Lettering

    Front Tires MUST TOUCH TRACK    Front and  Rear Tires.. ALL MUST BE Pro-Track .. STOCK WIDTH UN-CUT. .

                               ( Minimum is smallest part of Tire)   Minimum Dia. is .825 FRONT - REAR Minimum Dia.  .840

Maximum Dia. ( Being the biggest part of Tire) .880 .These are one Day Race Events..Put your Best Sneakers on

# 5. Motors:   your Track Rules

# 6.  GEAR - Any Pinion ....Any  Crown gear . Stock- No lightening/ altering  

REALITY VINTAGE MODIFIED RULES: 2019-2020

Chassis

PARMA # 578 1/24 FCR 4.5 WB or Reality Vintage chassis.

Body MUST be MOUNTED CENTER on Chassis. No off-set chassis

Chassis may be Cut on center . Mounting is optional..

Must have FRONT BUMPER and REAR BUMPER

Front Bumper made from 1/16 Brass Rod and or May Be Reinforced with Brass Stock

Rear Bumper MUST BE made from 1/8 - 3/16 Channel, Square, Rectangular or Round Brass.

Must have SIDE BARS made from MINIMUM 1/16Brass Rod, MAX WIDTH of 3 1/4"

Rear Bumper, and Side Bars MUST be at Center Axle Height of rear axle, or higher

Must use PARMA # 626 1/8" Square Axle Adjustable-Bushing

NO ALTERING BUSHING SLOTS and NO ALTERING of Bushing Oil Lite

Oil Lite Bushings may be Soldered or Glued in

NO DRILLING or LIGHTNING of Chassis

NO BENDING of Chassis in Front or Rear by Motor Mount

Chassis must be and Lay Flat!

ALL Weight MUST be ON TOP SIDE of Chassis

NO WEIGHT UNDER Chassis. WEIGHT 180

AXLE must be 1/8" SOLID ONLY and may be shortened

SPACERS WILL BE H&R on FCR Parma 

LF - 1 - .040 RF - 1 - .120

LR - .205 RR - .300

Reality Vintage: 

LF- 1 .060 RF- 1 .160

LR- 1 .060 RR- 1 .160

MAX. WHEEL Width of 3 1/4"

May have Free Wheel on Front Axle

MOTOR - Your Rules

GEARING will be 31-T Crown

Open Pinion

Chassis must CLEAR 1/16" Tech Tool / Chassis Height gauge.

TIRES:

Stock uncut Daytona Pro-track only. MUST HAVE PRO-TRACK LETTERING ON ALL 4 TIRES MUST BE ABLE TO READ LETTERING.

Max width of .800

No greater than .910 no less than .870 in diameter, any part of tire

These are one Day Race Events..Put your Best Sneakers on

BODIES

NO serverly RAKED BODIES/ Chopped

Body Ht. 1-5/8 from Chassis

Spoilers Must Be Approved .

1934 & UPCoupe, Coach , Pintos, Vega,ETC

NO VIK.