VINTAGE MODIFIED Rules: 2018-2019
PARMA # 578 1/24 FCR 4.5 WB, Reality Vintage Chassis
Body MUST be MOUNTED CENTER on Chassis. No off-set chassis
Chassis may be Cut on center . Mounting is optional..
Must have FRONT BUMPER and REAR BUMPER
Front Bumper made from 1/16 Brass Rod and or May Be Reinforced with Brass Stock
Rear Bumper MUST BE made from 1/8 - 3/16 Channel, Square, Rectangular or Round Brass.
One corner bar from bumper attaching to chassis,behind tire. Optional
Must have SIDE BARS made from MINIMUM 1/16Brass Rod, MAX WIDTH of 3 1/4"
Rear Bumper, and Side Bars MUST be at Center Axle Height of rear axle, or higher
Must use PARMA # 626 1/8" Square Axle Adjustable-Bushing
NO ALTERING BUSHING SLOTS and NO ALTERING of Bushing Oil Lite
Oil Lite Bushings may be Soldered or Glued in
NO DRILLING or LIGHTNING of Chassis
NO BENDING of Chassis in Front or Rear by Motor Mount
Chassis must be and Lay Flat!
ALL Weight MUST be ON TOP SIDE of Chassis
NO WEIGHT UNDER Chassis. WEIGHT 180
AXLE must be 1/8" SOLID ONLY and may be shortened
SPACERS Parma Chassis > H&R
LF - 1 - .040 RF - 1 - .120
LR - .205 RR - .300
LF- 1 .060 RF- 1 .160
LR- 1 .060 RR- 1 .160
MAX. WHEEL Width of 3 1/4"
May have Free Wheel on Front Axle
MOTOR will be JK HAWK 7 #30307
GEARING will be 31-T Crown
Chassis must CLEAR 1/16" Tech Tool / Chassis Height gauge.
TIRES to start Main
.910 REAR ....
MINIMUM Tire Width will be .800. Stock un-cut
Slight RAKED on BODIES.( Approved)
Spoilers Must Be Approved , Hard Plastic or Resin ONLY.
35 & up Coupe, Coach , No spoilers NO VIKIS
60's Mustang, Camaro ,Nova , Falcon ( Side bars optional ) Because of body with
70's Gremlin Vegas Pintos etc.
OPEN nose later model bodies must have engines , headers,rad, etc..as coupes..
BODY HEIGHT MINIMUM will be 1 5/8" from bottom of Chassis.
Must have Windshield
Must have Interior
Must have Driver
Must have Roll Cage
Must have 3 #'s Roof and Doors, Sponsor
Must Use Engine, Headers/ brass ok, Hood, Radiator