All Divisions Below:

Chassis clearence is 1/16 including the body
All bodies must remain even with the bottom of chassis or above
Only tires listed maybe used for each division
Wheel inserts , and roll cages from kits used a +, but  not mandatory.

HardBody Rules 2014    Basic Rules in BLACK.. 
Newest Updates
  

LATE MODEL: THE NEW!!!!! LateModel Division
Bodies: 1962 - 1973 .. Nova, Chevelle, Camaro, Falcons, Fairlane, Duster, etc. Mid-size cars
Resin Bodies Allowed. Full Bodies

Bodies must be trimmed as low as practical. Bodies must be even with bottom of chassis or above 
Some type of windshield is required, interior w/driver required.
ALL BODIES MUST HAVE AN INTERIOR No Clear interiors.  All Cars must have a Driver mounted inside.
Roll cages from kits glued to inside of roof . Not mandatory
Numbers must be on both doors and truck or roof.
Trim vent windows and door handles off.

Chassis:  . Any Brass in-line chassis 4 - 4-1/2" Wheelbase. Maximum chassis width is 3-1/8"
Chassis & Body Ht.  .062   1/16" min.
Front & rear bumpers may be added. Brass only
Weight may be added. No drilling or lightening.
Motor brace may be added. Motors must remain in center of the chassis no offset.

Tires: PRO-TRACK Tires ONLY...Front & Rear
Tire width is .500 - .800 max.
Tire size is 1.062 max dia- .900 minimum front & rear  checked with gauge
Steel 1/8" axles only. Maximum lenght is 2-3/4"
Wheels may spin independently.
Offset - FCR or homemade chassis left side tires must be even with or past outside of left side of chassis.

                                                                                       Maximum Width is 3-1/4" ( Champion gauge )
  H & R Chassis stock ( 3/16 min. ) spacer must be in place on LR..
 Maximum Width is 3-1/4" ( Champion gauge )

Motor:  Parma 16d Deathstar # 501 motor,  any pinion- any crown.
   Falcon, or Hawk 7 motors w/ 10t pinions- 31t crown gear only










All Divisions Below:
Wires may be replaced on all H & R motors 
Chassis clearence is 1/16 including the body
All bodies must remain even with the bottom of chassis or above
Only tires listed maybe used for each division
Wheel inserts , and roll cages from kits used a +, but  not mandatory.

JALOPY RULES:
Bodies: from 1955- 1961. Model car kits or Resin
Bodies must have full windshield, and interior with driver.
Numbers on both doors and trunk.
Stock plastic wheels from model kits fit inside the slot car wheels 
     Jalopy- from original kit
     Street Stock- racing wheel from original kit or stock hub
     Truck- racing wheel from original kit or wide- 5 resin or stock hub

Chassis: H & R Chassis # HRH01 Must remain stock. Weight may be added.
No Modifications, No Offset.. Maximum width 3-1/4 ( Champion gauge )
Parts must be replaced with OEM parts ONLY including tires, motor,etc.

STREET STOCKS: Same rules as above. Bodies from older nascar kits suggested..
1978-1994..?? Not sure ask...
Monte Carlos, Buick Regal, Ford Thunderbird, Pontiac Grand Prix, Oldsmoble..


Tires. Pro-track /H & R
Street Stock- all 4 tires- part # N330 or N337 or stock front H&R
Jalopies- all 4 tires- part # H&R stock fronts or N330 or N337
Trucks-  all 4 tires- part # N320 or  N241
Gears may be changed. No Front and rear bumpers may be added.
All Motors... Street Stocks, Jalopys,  H& R Motor OEM

TRUCKS:
1. Bodies:1/24- 1/25 Scale .. 
     Model kit bodies from old nascar truck series Chevy, Ford, Dodge.
      Must have interior, windsheild, rear spoiler, rearward  roll cage bars from   
      window back.
2. Motors: 
     
H&R Stock Motor any pinion or Falcon 7, Hawk 7- 10t pinion
      Any crown gear.
3. Chassis:
       H&R  # HRH01.  Pro-Track (brass)

4. Tires. Pro-track /H & R
             Trucks-  Wide all 4 tires- part # N320 or  N241
5. Wheel Width:  3-1/4" Offset.  Trucks Only 
     Stock spacers must remain on Left  Rear, offset is made by making the width 3-1/4". Champion gauge.